Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wlvxl-000BjaC; Wed, 9 Jul 97 07:35 CDT |
CC: |
|
Old-Return-Path: |
|
Date: |
Wed, 9 Jul 1997 08:44:11 +0000 |
Precedence: |
list |
Comments: |
|
Resent-Sender: |
|
MIME-Version: |
1.0 |
Reply-to: |
|
Priority: |
normal |
X-Status: |
|
Status: |
O |
X-Loop: |
|
X-Mailing-List: |
|
TO: |
|
Resent-From: |
|
Content-transfer-encoding: |
7BIT |
Resent-Message-ID: |
<"0XgCm2.0.z1F.4Mump"@ipc> |
X-mailer: |
Pegasus Mail for Win32 (v2.53/R1) |
>From willli Wed Jul 9 07: |
35:31 1997 |
From [log in to unmask] Wed Jul 9 11: |
06:10 1997 |
Content-type: |
text/plain; charset=US-ASCII |
Subject: |
|
From: |
|
In-reply-to: |
|
X-Confirm-Reading-To: |
|
Return-Path: |
<TechNet-request> |
Message-Id: |
|
Parts/Attachments: |
|
|
> What is the smallest reasonable text size for silkscreen text. Text
> height, width, and thickness. With design density increasing, we would
> still like to have as many ref des possible. From a PCB designer,
> what tooling parameters are acceptable for good resolution on the
> finished products.
>
There is an excellent article on the subject of silkscreening in Printed
Circuit Design magazine by Mary Sugden and Mona Johnson. It began in the
November 1996 issue and ended in February 1997. My company was considering
adding the reference designations on our boards about the time the articles
started. I showed my supervisor the articles and pointed out that they
recommended that it not but used BUT if you must, these are the points you must
consider. Fortunately we are not going to mark our boards. We have little
enought room for the things we need to add without adding "bells and whistles"
to the artwork (not to mention cost).
Hope this helps!
JoAnn L. Amerson
Design Librarian
Red Lion Controls, Inc.
E-mail: [log in to unmask]
Voice: (717) 767-6961 ext 6308
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|