Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wtwlu-000Bk5C; Thu, 31 Jul 97 10:04 CDT |
Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
Old-Return-Path: |
<buetmi> |
Date: |
Thu, 31 Jul 1997 10:04:05 -0500 (CDT) |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
MIME-Version: |
1.0 |
X-Mailing-List: |
|
>From willli Thu Jul 31 10: |
04:31 1997 |
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Resent-Message-ID: |
<"D6hSe3.0.VMK.fbAup"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Thu Jul 31 12: |
55:42 1997 |
In-Reply-To: |
|
cc: |
|
Message-ID: |
<Pine.3.89.9707310945.A59167-0100000@ipc> |
Parts/Attachments: |
|
|
IPC-SD-320 was canceled March 1992. It was superseded by IPC-RB-276,
which was then superseded (in October 1996) by IPC-6012, the rigid board
qualification specification.
I'm assuming IPC-A-6000 refers to the "0" revision of the standard; in
other words, the original publication. If so, this was canceled in Sept.
1979, and has been superseded several times. The current edition is
IPC-A-600E, published in AUgust 1995. This is a pictorial representation
of the requirements set forth in IPC-RB-276/IPC-6012.
Mike Buetow
IPC
2215 Sanders Road
Northbrook, IL 60062
P: 847-509-9700, ext. 335
F: 847-509-9798
[log in to unmask]
On Thu, 31 Jul 1997 [log in to unmask] wrote:
> From: Stephen Ayotte
> EM Quality Engineering
> Bldg. 14-3 Col F5 5-1537
> Subject: Fabrication Specs
>
> Any information on the following specs would be appreciated:
>
> IPC-SD-320
> IPC-A-6000
>
> they are not in my IPC manuals and do not know what they are
> about.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|