 
| X-mailer: |
Pegasus Mail for Windows (v2.42a) |
| Content-Type: |
text/plain; charset=US-ASCII |
| Old-Return-Path: |
<simon!teleport.com!axiom!andyf> |
| Date: |
Fri, 25 Jul 1997 10:33:26 +0000 |
| Precedence: |
list |
| From [log in to unmask] Mon Jul 28 09: |
43:58 1997 |
| >Received: |
from axiom/andyf by axiomsmt.com
(PMail+UDG PegWaf v0.31 93.10.18) id 0636 for [log in to unmask];
Fri, 25 Jul 1997 10:33:38 PST 8 PDT |
| >From willli Fri Jul 25 13: |
52:52 1997 |
| MIME-Version: |
1.0 |
| Status: |
O |
| Priority: |
normal |
| TO: |
|
| X-Status: |
|
| Content-transfer-encoding: |
7BIT |
| X-Loop: |
|
| X-Mailing-List: |
|
| Resent-From: |
|
| Resent-Sender: |
|
| Resent-Message-ID: |
<"nzuUS3.0.CoH.iNFsp"@ipc> |
| Subject: |
|
| From: |
|
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wrpTZ-000BjuC; Fri, 25 Jul 97 13:52 CDT |
| Return-Path: |
<TechNet-request> |
| Organization: |
Axiom Electronics, Inc. |
| Message-Id: |
|
| Parts/Attachments: |
|
|
Hi,
Does anybody out there know of an "instant" adhesive type material
that can be used to seal trace cuts? This material must be able to
withstand reflow and wave conditions.
Currently, we are using Loctite TakPak materials, and they are not
cutting it. The temperatures are just too hot, and the material
degrades and/or loses adhesion.
What do board fabs use to repair scratches? Perhaps there is an
"instant" soldermask repair material?
Many thanks in advance,
Andy French
Engineering
Axiom Electronics
Beaverton, OR
TEL (503) 643-6600
FAX (503) 641-0572
Email [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
