Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wYVpq-000BjGC; Mon, 2 Jun 97 07:03 CDT |
Encoding: |
47 TEXT |
Old-Return-Path: |
|
Date: |
Mon, 02 Jun 97 07:10:00 PDT |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
From [log in to unmask] Mon Jun 2 10: |
00:48 1997 |
>From bergdi Mon Jun 2 07: |
03:58 1997 |
Resent-Message-ID: |
<"e4dCD.0.qpN.PQhap"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Return-Path: |
<TechNet-request> |
X-Mailer: |
Microsoft Mail V3.0 |
Message-Id: |
|
Parts/Attachments: |
|
|
Use a wicking type of threadlock material (one that penetrates assembled
threads) after all extended temperature processes ( soldering, ESS). There
are different types of wicking threadlock that can be loosened or not
depending on your application. There are multiple vendors of this material,
so don't lock yourself into Loctitie. There should be minimal loosening of
the assy during processing, so I wouldn't worry about that.
----------
From: TechNet-request
To: technet
Subject: assy - loctite hardware on pcb assemblies
Date: Saturday, May 31, 1997 7:29AM
When a customer / drawing requires threadlock "loctite" on hardware
at the pcb level, what step in the manufacturing processes does it
get applied ?
If prior to wave solder, what steps are taken to ensure it does not
break down ? example "loctite 242" breaks down at 300F.
Do you have a problem with small hardware becoming loose during the
assembly processes?
What material "threadlock" do you use in your facility?
Where is it installed ?
Do you re-apply after wavesolder / clean?
If you re-apply, do you completely clean off old material ?
Thanks for any feedback in advance;
Wesley Samples
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|