Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset=US-ASCII |
Old-Return-Path: |
|
Date: |
Fri, 27 Jun 1997 10:08 -0800 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
>From willli Fri Jun 27 12: |
05:36 1997 |
TO: |
|
Return-Path: |
<TechNet-request> |
From [log in to unmask] Fri Jun 27 19: |
21:38 1997 |
Resent-Message-ID: |
<"npXZr3.0.PmP.9B_ip"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wheSQ-000BjaC; Fri, 27 Jun 97 12:05 CDT |
Message-Id: |
|
Parts/Attachments: |
|
|
We currently HASL before nomen, but our technicians have made comments
that sometimes the nomen interferes with inspection. If it is a busy
board with lots of nomen, the white patterns can act as a camouflage to
the defect. The eyeball can't seem to process the information it is
receiving.
----------
From: jwmcinty[SMTP:[log in to unmask]]
Sent: Friday, June 27, 1997 10:39 AM
To: johnst; jamesken; davidbo; TechNet
Subject: Idents before or after HASL
What is the most common practice:
Silkscreen idents before or after HASL?
I would appreciate any comments on this.
thanks -
Jamie McIntyre
PCI
Toronto, Canada
**************************************************************************
*
* TechNet mail list is provided as a service by IPC using SmartList v3.05
*
**************************************************************************
*
* To subscribe/unsubscribe send a message <to: [log in to unmask]>
*
* with <subject: subscribe/unsubscribe> and no text in the body.
*
**************************************************************************
*
* If you are having a problem with the IPC TechNet forum please contact
*
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]
*
**************************************************************************
*
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|