We use racks labeled: Calmark Series 910 Card Guides.
They come from Southern Fastener, Winchester VA.
They are glass filled epoxy and are ok for a 300F bake.
----------
From: [log in to unmask][SMTP:[log in to unmask]]
Sent: Tuesday, June 24, 1997 4:21 PM
To: [log in to unmask]
Subject: S/M Tack Cure Racks
I am currently trying to evaluate different rack configurations for
tack curing and final bake after soldermask. I am looking for the
names of various rack manufacturers to contact. Thanks in advance.
Dennis
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************