 
| Mime-Version: |
1.0 |
| Content-Type: |
text/plain; charset="us-ascii" |
| Old-Return-Path: |
|
| Date: |
Fri, 20 Jun 1997 13:11:10 -0400 (EDT) |
| From [log in to unmask] Tue Jun 24 16: |
30:43 1997 |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| X-Sender: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| Precedence: |
list |
| X-Loop: |
|
| Resent-Message-ID: |
<"11Gzl1.0.1P8.UUhgp"@ipc> |
| Subject: |
|
| From: |
|
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wf74p-000BjbC; Fri, 20 Jun 97 12:02 CDT |
| >From buetmi Fri Jun 20 12: |
02:54 1997 |
| X-Mailer: |
Windows Eudora Pro Version 2.1.2 |
| Message-Id: |
|
| Parts/Attachments: |
|
|
Doug,
We do a type of double soldering on many hand soldered high voltage
components. Actually, it involves normal soldering of the component and
then making a second pass and "ball soldering" the bottom side of the board
with a lower melting point solder. The idea is to eliminate any sharp
points which could serve as "risers" for high point charges and arcing.
S. Smith, Tracor AES
At 12:01 PM 6/20/97 -0400, you wrote:
>Has anyone heard of this term being used anywhere?
>
>It has been referred to being used in high voltage
>circuits, typically tv circuits.
>
>Regards, Doug
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
>* with <subject: subscribe/unsubscribe> and no text in the body. *
>***************************************************************************
>* If you are having a problem with the IPC TechNet forum please contact *
>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
>***************************************************************************
>
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
