 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0weja9-000BjVC; Thu, 19 Jun 97 10:57 CDT |
| Old-Return-Path: |
|
| Date: |
Thu, 19 Jun 97 09:00:06 PST |
| From [log in to unmask] Tue Jun 24 16: |
24:58 1997 |
| X-Loop: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| >From willli Thu Jun 19 10: |
57:19 1997 |
| Resent-Message-ID: |
<"F9JKw1.0.GbA.KRLgp"@ipc> |
| Subject: |
|
| From: |
|
| Precedence: |
list |
| Resent-From: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
Sam,
You might want to look at it from a different perspective. If you measure, test
or inspect in-process, why would you not calibrate these and reduce or eliminate
final test (except for those that are regulatory or mandated). We calibrate
also the in-process to prevent escape of failures to final verification and for
fast preventive and corrective action feedback to
suppliers/design/production/engineering/etc .
BW
______________________________ Reply Separator _________________________________
Subject: ISO9002
Author: [log in to unmask] at uucpmail
Date: 6/18/97 12:01 PM
The ISO9002 standard requires the supplier to maintain procedures to
control, calibrate and maintain inspection, measuring, and test equipment
used by the supplier to demonstrate the conformance of product to the
specified requirements.
We understand this statement but are wondering if we need to include
in-process equipment which is NOT used to demonstrate conformance of the
product to the specified requirement.
All comments are appreciated.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
