Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
|
Date: |
Tue, 03 Jun 1997 17:57:05 +0700 |
Precedence: |
list |
Resent-From: |
|
From [log in to unmask] Tue Jun 3 08: |
54:25 1997 |
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
X-Sender: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Resent-Message-ID: |
<"W0B5a2.0.IlI.OP_ap"@ipc> |
Subject: |
|
From: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wYr85-000BjGC; Tue, 3 Jun 97 05:47 CDT |
>From bergdi Tue Jun 3 05: |
48:14 1997 |
X-Mailer: |
Windows Eudora Pro Version 3.0 (32) |
Message-Id: |
|
Parts/Attachments: |
|
|
Dear Sirs,
I have a question for SMT specicification and need your advice as following;
Refer to IPC-A-610B, Soldering, P.55, Figure 4-17
Nonconforming Defect - class 1,2,3
c. Solder has bridged to adjacent to noncommon conductor.
If two SMT components has bridged, but they are on the common conductor.
Could you please clarify me whether this condition can be acceptable or not?
Thank you in advance for your help.
Best regards,
Sarunya P.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|