 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wccoE-000BjMC; Fri, 13 Jun 97 15:18 CDT |
| Content-Type: |
text/plain; charset=US-ASCII |
| >From willli Fri Jun 13 15: |
19:24 1997 |
| Date: |
Fri, 13 Jun 97 16:26:33 -0500 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| MIME-Version: |
1.0 |
| From [log in to unmask] Tue Jun 17 11: |
12:28 1997 |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Status: |
|
| Status: |
O |
| X-Loop: |
|
| Resent-Message-ID: |
<"WEDNc2.0.xWQ.niQep"@ipc> |
| Subject: |
|
| From: |
|
| Old-Return-Path: |
|
| Content-Transfer-Encoding: |
7bit |
| X-Mailer: |
ccMail Link to SMTP R8.00.00 |
| Message-Id: |
|
| Parts/Attachments: |
|
|
Automata, Inc, 1200 Severn Way, Sterling, Virginia 22170, phone
703-450-2600, contact: Steve Silbert, Joe Ahearn.
I believe that the material is licensed by Zycon to board fabricators.
Please call if I can help further J. Zeinstra; 616-241-7879
______________________________ Reply Separator _________________________________
Subject: Buried capacitance material
Author: <[log in to unmask]> at SMTPpost
Date: 6/13/97 3:27 PM
Can someone provide me some information on buried capacitance material.
Specifically I am interested in double sided .002 core 1/1 Zycon ZBC-2000
material. This material has been specified on a drawing and I need to know the
following information.
1. Is it available to any PCB shop?
2. Where do you get it?
3. What is the lead time? ( special materials many times take a while to get)
4. Is there any special processing required? Specifically in the de-smear/
etchback
process and drilling.
Any help I can get would be greatly appreciated.
Ed Cosper
Director Quality Assurance and Engineering
Graphic Electronics Inc.
Tulsa, OK
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
