Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wcYSv-000BjMC; Fri, 13 Jun 97 10:40 CDT |
Encoding: |
28 TEXT, 24 TEXT |
Old-Return-Path: |
|
Date: |
Fri, 13 Jun 97 15:55:00 GMT |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
From [log in to unmask] Tue Jun 17 11: |
11:18 1997 |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Status: |
O |
X-Loop: |
|
Resent-Message-ID: |
<"F75AW1.0.Q1F.udMep"@ipc> |
Subject: |
|
>From willli Fri Jun 13 10: |
41:06 1997 |
X-MS-Attachment: |
ATT04677.htm 723 06-06-1997 19:56 |
Message-ID: |
|
X-Mailer: |
Microsoft Mail V3.0 |
From: |
|
Parts/Attachments: |
|
|
I like the (fresh)idea. but have not seen anyone using that. May be the
blowing air can disturb the solder while it is solidifying and leave its
marks(footprints-duckpads). May be this can create mess of solder balls all
around? May be this can migrate briges instead of complete removal.?Air blow
holes /pinholes ??
Most people have sorted the solder bridging problem by matching solder mask,
flux and wave solder parameters. Solder bridge can be due to design factors-
vias too close to pads or lead length or lead crimping problem.
I would like to have more info on this as we also do find this problem.
ashok dhawan
[log in to unmask]
----------
From: Tony Stewart
To: [log in to unmask]
Subject: Hot Air Knife after solder pot?? Anyone use this?
Date: Friday, June 06, 1997 7:45PM
I would like to retrofit a hot-air knife in our waves after wave reflow to
reduce bridge opportunities on designs that are not optimized.
We use some Centruy 2000s and SOLTEC waves.
Tony
Eng Mgr
C-MAC Electronic Systems Inc
[[ ATT04677.htm : 2586 in ATT04677.htm ]]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML 3.2//EN">
<HTML>
<HEAD>
<META content=text/html;charset=iso-8859-1 http-equiv=Content-Type>
<META content='"Trident 4.71.0544.0"' name=GENERATOR>
</HEAD>
<BODY>
<P><FONT face=Arial size=2>I would like to retrofit a hot-air knife in our waves
after wave reflow to reduce bridge opportunities on designs that are not
optimized.</FONT>
<P><FONT face=Arial size=2>We use some Centruy 2000s and SOLTEC waves.</FONT>
<P><FONT face=Arial size=2></FONT>
<P><FONT face=Arial size=2>Tony</FONT>
<P><FONT face=Arial size=2>Eng Mgr</FONT>
<P><FONT face=Arial size=2></FONT><FONT face=Arial size=2>C-MAC Electronic
Systems Inc</FONT></P>
</BODY></HTML>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|