 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wcA9v-000BjSC; Thu, 12 Jun 97 08:43 CDT |
| Content-Type: |
text/plain; charset=US-ASCII |
| >From willli Thu Jun 12 08: |
43:49 1997 |
| Old-Return-Path: |
|
| Date: |
Thu, 12 Jun 1997 08:50:09 -0500 |
| Precedence: |
list |
| Resent-From: |
|
| Message-ID: |
|
| Content-Transfer-Encoding: |
7bit |
| From [log in to unmask] Tue Jun 17 11: |
04:55 1997 |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Status: |
|
| Status: |
O |
| Content-Description: |
cc:Mail note part |
| Subject: |
|
| From: |
|
| X-Loop: |
|
| Mime-Version: |
1.0 |
| Resent-Message-ID: |
<"TVXm-3.0.MD7.zp_dp"@ipc> |
| Resent-Sender: |
|
| Parts/Attachments: |
|
|
1) Use a RMA at repair (use flux pen for liquid) and leave it on the
board. Bench cleaning RMA by hand just spreads the activator all over
the board while removing the encapsulating rosin.
2) Alcohol works well for RMA and burn-off no clean, but read note 1.
______________________________ Reply Separator _________________________________
Subject: ASSY: Genesolv replacement
Author: "Blanchet;Richard" <[log in to unmask]> at INTERNET
Date: 6/12/97 7:52 AM
Hello,
Two more questions for today:
1- Does any one know about a replacement for Genesolv ? I heard about HFEs
($$$) and Axarel 32, but we would ideally need something that can be used is
small containers at people's workbench.
2- How do you guys manage to keep to small components in place in the static
wave soldering bath for the solder-cut-solder operation ? I know you can
preform the components with a lock-in shape, but is there other ways to
prevent components from lifting off the board ?
Thank you all.
Since my second question is at a very basic level, you can reply directly to
me at:
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
