I am looking for a source for a REED RELAY MOUNTING CLIP. They are 
     used for mounting reed relays to printed wiring boards. 
     
     The mounting clip is inserted into a .062  hole in the PWB and swaged 
     or soldered in place. Generally they are used in sets of 4 or more to 
     accommodate the coil and relay contacts. 
     
        I can supply a drawing of the part if it would help.
     
                Thanks in advance.
     
     Dan Botts 
     Hughes Training Inc.
     [log in to unmask]
     607-721-4565 
     
     

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************