LISTSERV - TECHNET Archives - LISTSERV.IPC.ORG

TECHNET Archives

May 1997

TechNet@IPC.ORG

	LISTSERV Archives
	TECHNET Home
	TECHNET May 1997

	Log In
	Register

	Subscribe or Unsubscribe

	Search Archives

Options:	Use Monospaced Font Show Text Part by Default Show All Mail Headers
Message:	[<< First] [< Prev] [Next >] [Last >>]
Topic:	[<< First] [< Prev] [Next >] [Last >>]
Author:	[<< First] [< Prev] [Next >] [Last >>]

Subject:	RE: Re:FAB Prepreg style 2113
From:	[log in to unmask]
Date:	Wed, 21 May 1997 8:34:08 +0000
Content-Type:	text/plain
Parts/Attachments:	text/plain (46 lines)

2113 is used a lot in Europe where it more or less replaces 2125 as a 4 mil 
prepreg. It presses maybe a smidgeon thinner but not much (depending on the 
resin content favoured by your local supplier). The only downside is that it 
has almost the same thread count as 2116 and is therefore difficult to 
distinguish visually. this can lead to confusion and the odd mistake among 
companies that employ humans.
Dave Heywood
[log in to unmask]
 ----------
From: [log in to unmask]
To: [log in to unmask]; Dave Heywood
Subject: Re:FAB Prepreg style 2113
Date: 21 May 1997 03:08

<<File Attachment: ENVELOPE.TXT>>
We are after typical build uses of style 2113 prepreg.

Any help would be appreciated.

Regards,
David Taylor
Chief Engineer
East Coast Printed Circuits

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************


***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2

LISTSERV.IPC.ORG