Hello Technet:
Does anyone have any knowledge regarding solder dross contamination in
otherwise properly formed solder joints? The joints were formed in a wave
solderer and exhibit dross contamination roughly .005" - .010" in diameter.
The joints seem to have proper "meniscus" and are mostly "shiny", but are
dull around the entrapped dross.
Is this purely cosmetic or does it present a potential solder joint problem?
Thank you for your help
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************