Subject: | |
From: | |
Date: | Fri, 09 May 97 13:47:17 EST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
The gold is likely to be impervious. The substrate nickel, though,
will be etched by nitric. If it is a pattern plate Ni/Au (Ni/Au etch
resist) then don't put through nitric strip.
Matt Byrne
______________________________ Reply Separator _________________________________
Subject: FAB: Nitric Acid Strip
Author: [log in to unmask] at SMTPLINK-HADCO
Date: 5/7/97 08:07 PM
Address,
Is hard/soft gold impervious to a Nitric Acid Strip, if so, how many
passes are typically allowed (assuming a gold tab area)?
John Gulley
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|