Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wWKtE-000BjBC; Tue, 27 May 97 06:58 CDT |
Encoding: |
51 TEXT |
Old-Return-Path: |
|
Date: |
Tue, 27 May 97 07:04:00 PDT |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Resent-Message-ID: |
<"nBnxw.0.nsB.FniYp"@ipc> |
Subject: |
|
From: |
|
>From bergdi Tue May 27 06: |
58:24 1997 |
X-Mailer: |
Microsoft Mail V3.0 |
From [log in to unmask] Tue May 27 09: |
07:17 1997 |
Message-Id: |
|
Parts/Attachments: |
|
|
In the gerber, leave it 1 to 1 as a standard that the process folks can
depend on and modify themselves to fit their processes. Because of
different component types on the assembly, they may want to go from an 8 mil
stencil to 6 mils which would change the aperture size on other components.
----------
From: TechNet-request
To: Technet
Subject: Stencil opening
Date: Monday, May 26, 1997 1:51PM
Hi,
You wrote once in Technet :
Is there a rule-of-thumb when designing paste aperture sizes for
non-standard pad sizes. I'm thinking about a copper area vs stencil
opening area ratio for SMT.
__________________________________
Scott Buscomb
[log in to unmask]
voice 770 338-6170
MTCC/Panasonic, Pager Development
Atlanta, GA USA 30174
__________________________________
Did you get any replies ? If you got any, please forward them to me.
Thanks in advance for your cooperation.
Brs, [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|