Subject: | |
From: | |
Date: | Wed, 7 May 1997 08:54:38 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
>----------
>From: Stimson, Dwight
>Sent: Wednesday, May 07, 1997 8:32 AM
>To: 'IPC - Tech Net'
>Subject: FW: ASSY: Component Prep
>
>
>
>----------
>From: Nguyen, Anh
>Sent: Wednesday, May 07, 1997 8:28 AM
>To: Stimson, Dwight
>Subject: RE: ASSY: Component Prep
>
>
>
>GPD ( General Production Devices)
>23221 I-70 Frontage Rd.,Grand Juction, CO 81505
>Tel: (970) 245-0408 Fax: (970)245-9674
>Custommer Priority Line 1-800-PICK GPD (1-800-742-5473)
>
>
>Anh Nguyen
>
>----------
>From: Stimson, Dwight
>Sent: Wednesday, May 07, 1997 7:43 AM
>To: Nguyen, Anh
>Subject: FW: ASSY: Component Prep
>
>
>
>----------
>From: Kasprzak, Bill (esd) US[SMTP:[log in to unmask]]
>Sent: Wednesday, May 07, 1997 10:08 AM
>To: IPC-Tech Net
>Subject: ASSY: Component Prep
>
>
>Fellow Technetters:
>
>We are a low volume board assembly facility where we build boards in lots of
>10 - 50 pieces. We use an array of component prep equipment for axial leaded
>components. Among these we are using a GPD, CF-8. My last number for GPD had
>them located in Grand Junction. Colorado at 303-245-9674. Apparently they
>have moved. Anybody have their new address and phone number ?
>
>Given the volume of boards we process. I'm curious as to what kinds of
>equipment people use for component prep. We use the GPD machine because it
>can virtually form any axial leaded part to most any form. It's major
>drawback is that it is not a user friendly piece of equipment. We also
>receive most of our parts from stock in loose bulk form.
>
>We also use Technical Devices Mark V machines for cutting and prepping parts
>when we have a die available for that span. Purchasing individual dies for
>all of different sizes of components for the Mark V would be cost
>prohibitive.
>
>So....
>I interested in getting some inputs into what kinds of equipment users have
>for prepping parts in volumes similar to ours. Respond either direct to me
>or to the net.
>
>Thanks in advance to all who can respond.
>
>Bill Kasprzak
>Moog Inc.
>716-652-2000 ext 2507
>[log in to unmask]
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
>* with <subject: subscribe/unsubscribe> and no text in the body. *
>***************************************************************************
>* If you are having a problem with the IPC TechNet forum please contact *
>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
>***************************************************************************
>
>
>
>
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|