In message <[log in to unmask]
>, scott birnbaum <[log in to unmask]> writes
>Does anyone have information on testing unpopulated pwb's with high
>current (several amps?) with the intent of stressing each trace to
>"blow" any near opens. Is there automated equipment to do this? What
>are the potential pitfalls?
>
>thanks
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
>* with <subject: subscribe/unsubscribe> and no text in the body. *
>***************************************************************************
>* If you are having a problem with the IPC TechNet forum please contact *
>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
>***************************************************************************
>
Dear Mr Birnbaum.
A company called READ Electronics based in Japan produces such test
equipment. If you contact me with your mailing adress I shall have
information sent to you.
Thanks.
--
jake kelly
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************