Subject: | |
From: | |
Reply To: | |
Date: | Fri, 16 May 1997 08:58:18 +0000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Yuan,
Have you considered a bottom side Kapton label that can withstand all
production processes. This would be the easy way to gain the space
you need. Do you have need for human readable labels? If not the
new 2D arrays may be an option.
> From: [log in to unmask]
> Date: Fri, 16 May 97 08:49:31 MDT
> To: [log in to unmask]
> Subject: Ask for help on barcode labeling
>
>
> I was given a project to investigate new bar code technology. The reason is
> we currently have to reserve too much keep out area for bar code labels:
> all PCBA's require Qty 2 keep out areas 7mm x 33 mm for labels. This is
> becoming very difficult for high-density PCBAs. We need to come up with
> smaller labels to fit into smaller keep out areas. I like to know any
> information helpful including
>
> New label materials
> New equipement
> New methods (bar coding the side/edge of the board)
> etc.
>
> Appreciate any help.
>
> Yuan Li, Ph.D.
> SMT Engineer
> Exabyte, (303)417-5655, 417-7130 (fax)
>
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To subscribe/unsubscribe send a message <to: [log in to unmask]> *
> * with <subject: subscribe/unsubscribe> and no text in the body. *
> ***************************************************************************
> * If you are having a problem with the IPC TechNet forum please contact *
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
> ***************************************************************************
>
>
Lee McCuistion
Manufacturing Engineer
Cubix Corporation
702-888-1000 x237 (voice)
702-888-1002 (fax)
[log in to unmask] (e-mail)
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|