Bill, the phone numbers you need for GPD are:  970-245-0408, fax
970-245-9674.
 ----------
From: Kasprzak, Bill        (esd) US
To: IPC-Tech Net
Subject: ASSY: Component Prep
Date: Wednesday, May 07, 1997 9:08AM



Fellow Technetters:

We are a low volume board assembly facility where we build boards in
lots
of
10 - 50 pieces. We use an array of component prep equipment for axial
leaded
components. Among these we are using a GPD, CF-8. My last number for GPD
had
them located in Grand Junction. Colorado at 303-245-9674. Apparently
they
have moved. Anybody have their new address and phone number ?


Thanks in advance to all who can respond.

Bill Kasprzak
Moog Inc.
716-652-2000 ext 2507
[log in to unmask]

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************