Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wN0op-000BisC; Thu, 1 May 97 13:43 CDT |
Encoding: |
51 TEXT |
Old-Return-Path: |
|
Date: |
Thu, 01 May 97 15:52:00 E |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
From [log in to unmask] Fri May 2 09: |
50:38 1997 |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"qeInn1.0.dDK.rGEQp"@ipc> |
Subject: |
|
From: |
|
X-Status: |
|
X-Loop: |
|
X-Mailer: |
Microsoft Mail V3.0 |
Message-Id: |
|
Parts/Attachments: |
|
|
One of the things we try to do is run test material on a piece of equipment
we plan on buying, perform SPC, and look for a Cpk of 1.3 or better. This
means that the equipment must be available for use, material available in
quantities that allow SPC, etc.. It results in a level of expertise (since
the machine must be programmed for your test piece.) It can be tied to the
installation and training of the device. And you can tie acceptance of the
equipment to the SPC performance.
A reputable house with good product should be willing to support such
activity.
Hope this helps.
Michael Lang
[log in to unmask]
----------
From: TechNet-request
To: TechNet
Subject: Guidelines on ordering electronic mfg equipment
Date: Thursday, May 01, 1997 12:41PM
I am seeking information on guidelines on what is important in selecting
electronic mfg equipment. I know each type has specific things important
but
in general is their some info available to help ask proper questions to an
equipment mfg or for a manager to review in house engineering specifications
for outside subcontracting of a piece of equipment? Some things come to
mind
ie: throughput,flexibility,programming ease, repeatability,etc.
Would appreciate any help you may provide.
Thank you
Don Kuhns
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|