 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wRbMg-000Bj1C; Wed, 14 May 97 05:32 CDT |
| Content-Type: |
text/plain; charset=ISO-8859-1 |
| Old-Return-Path: |
|
| Date: |
Wed, 14 May 1997 06:35:33 -0400 |
| Precedence: |
list |
| Reply-To: |
|
| Resent-Sender: |
|
| MIME-Version: |
1.0 |
| Status: |
O |
| X-Mailing-List: |
|
| X-Status: |
|
| X-MSMail-Priority: |
Normal |
| X-Loop: |
|
| Return-Path: |
<TechNet-request> |
| Resent-From: |
|
| Resent-Message-ID: |
<"fZlGL3.0.pu8.OJPUp"@ipc> |
| Content-Transfer-Encoding: |
7bit |
| TO: |
|
| From [log in to unmask] Mon May 19 09: |
18:39 1997 |
| Subject: |
|
| From: |
|
| X-Mailer: |
Microsoft Internet Mail 4.70.1161 |
| X-Priority: |
3 |
| >From bergdi Wed May 14 05: |
33:17 1997 |
| Message-Id: |
|
| Parts/Attachments: |
|
|
Virtually all DMS systems will work in high aspect ratio holes up to the
point where you can't get solution through the holes, same as electroless.
However, DMS is VERY dependant on the equipment being in near perfect order
as well as proper chemistry, temperatures, etc. I would get a list of users
from the chemical guys and find out what equipment works best at those
users.
JMHardy, Chemring Plating Systems-North America
----------
> From: CSS Asia Co., Ltd. <[log in to unmask]>
> To: [log in to unmask]
> Subject: DMS vs. Electroless copper
> Date: Wednesday, May 14, 1997 3:31 AM
>
> We are considering to install a DMS line instead of electroless copper
> plating line. However some concern has been raised by one of our
engineers
> that DMS may not be good for high aspect ratio holes. Therefore I would
> like to ask Technetters' opinion on pro and con's of the two different
> technologies.
>
> Thanks in advance
>
> M. C. Chu
>
> CSS Asia Co., Ltd.
> 2nd Fl., Myungwoo B/D.
> 1460-17 Seocho-3-Dong, Seocho-Ku
> Seoul, Korea
> Tel: 82 2 523 8810 Fax: 82 2 523 1483
> [log in to unmask]
>
>
***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05
*
>
***************************************************************************
> * To subscribe/unsubscribe send a message <to: [log in to unmask]>
*
> * with <subject: subscribe/unsubscribe> and no text in the body.
*
>
***************************************************************************
> * If you are having a problem with the IPC TechNet forum please contact
*
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]
*
>
***************************************************************************
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
