Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
|
Date: |
Mon, 12 May 1997 08:57:58 -0500 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
From [log in to unmask] Mon May 12 08: |
47:47 1997 |
X-Sender: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
X-Mailing-List: |
|
Resent-Message-ID: |
<"NZNjt1.0.7GA.3ynTp"@ipc> |
Subject: |
|
From: |
|
>From bergdi Mon May 12 08: |
46:05 1997 |
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wQvQ4-000Bj1C; Mon, 12 May 97 08:45 CDT |
Cc: |
|
Message-Id: |
<v03010d03af9c8b7f76fe@[204.180.62.40]> |
Parts/Attachments: |
|
|
sent this up five days ago, and still haven't seen it on the net, so
sending again. jack
>From the EMPF HelpLine in Indianapolis, prepared by Jack Crawford:
Actually, the presentation was to the Indiana Surface Mount Technology
Association Chapter which the EMPF hosted. Copies of the paper are
available through the HelpLine at 317-655-3688. Are there many folks that
would be interested in a workshop or training course on this? Please reply
directly to [log in to unmask] jack
****************
>In January, Bill Barthel of Electronic Assembly Corp (Plexus) and Phil
>Zarrow of ITM presented excellent papers on implementation of intrusive
>reflow (AKA paste-in-hole, pin-in-paste) at the EMPF facility in
>Indianapolis. You may be able to get copies from EMPF. Contact their
>learning center at 317-655-3679. Also, I have found useful, the AMP
>connector company has their requirements/calculations for intrusive reflow
>for connectors on their homepage at www.amp.com/product/articles
> We have implemented the intrusive reflow process as of March with very good
>results. Good Luck.
>
>At 07:15 AM 5/7/97 +0000, you wrote:
>>Hey Techies,
>>I know someone out there has my answers.
>>I read a recent posting pertaining to a technique described as
>>Intrusive reflow. This is a process of reflow soldering thru hole
>>components. From a design for manufacturability view what do we need
>>to do special in our design to take advantage for this technique.
>>
>>Does the board require any special layout ?
>>
>>Do I need to modify the solder paste layer output ?
>>
>>What other considerations need to be taken into account in order to
>>add one or two components to a surface mount board with out adding
>>extra costs and subsequent processes.
>>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|