Lucy..
        The UV adhesive that I was referring to, is used primarily for
  bonding jumpers to PWB's before conformal coating and after all wave
  soldering. For wire tacking, a cure time of 4 to 8 seconds is required
  utilizing a UV source with approx .17 watts/cm sq. intensity. I don't 
  have any info on shear strength, but I would assume that Dymax would
  help you with any tech info that you require for their Multi-Cure 911 
  product. Hope this helps.
      
                                              Regards,
  Bob Vanech                                            Bob
  Norden Systems

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************