Had some problem from a supplier who is providing us flexible circuit which require plating. It seems that we can never get Ni
plated onto the flex cct. We need this flex for wirebonding. One suspect is
the photoimageable covercoat that was used on this flex while they have
experiences that the conventional covercoat used on other product do not give
them problem with Ni plating. Does any one has idea about this? Plating spec
is Ni-Pd-Au for wire bonding.
Appreciate any input.
thanks & regards,
stella
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************