Subject: | |
From: | |
Date: | Thu, 17 Apr 97 11:21:08 PST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello,
Does anyone have any experience with removing a high-density
(>100-pins) PTH connector that is both press-fit and soldered (not my
design)? So far, I came up with preheat/prebake @ 250 F for 1-4 hrs
and use a solder pot (i.e., Air-Vac), but I'm worried that I will
damage the through holes.
Regards,
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|