TECHNET Archives

April 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Date:
Tue, 15 Apr 97 12:58:36 PDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (35 lines)
Hello !
In IPC specification ANSI/IPC-RB-276, 1992, for "Qualification and Performance Specification 
for Rigid Printed Boards" it is specified a copper thickness of 15µm for buried and blind vias 
with a min.thickness of 13µm. However this spec. was changed during 1996, IPC-6012, there the 
copper thickness for blind vias were increased to an average thickness of 25µm with a min. 
thickness of 20µm.

Does anyone know why they changed their specifications? 
Is there someone who has any experience of blind and buried vias with thin copper coatings 
(15-13µm)?

Thanks in advance for your help

                 //Markus



Markus Gauffin  M.Sc.
Printed Board Assembly Technology
tel: +46 8 719 16 34
fax: +46 8 719 71 99
e-post: [log in to unmask]

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************



ATOM RSS1 RSS2