Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wJpK4-000BnJC; Tue, 22 Apr 97 18:50 CDT |
Content-Type: |
text/plain; charset=US-ASCII |
Old-Return-Path: |
|
Date: |
Fri, 18 Apr 1997 15:26:13 -0400 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
Content-Transfer-Encoding: |
7bit |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
From [log in to unmask] Mon Apr 28 17: |
07:39 1997 |
Content-Description: |
cc:Mail note part |
Subject: |
|
From: |
|
X-Loop: |
|
Mime-Version: |
1.0 |
Resent-Message-ID: |
<"WbWB82.0.kmG.gwKNp"@ipc> |
Message-Id: |
|
Parts/Attachments: |
|
|
I am trying to specify the stackup for a controlled impedance
psudo-VME backplane. This backplane has controlled impedance traces of
100 Ohms and 50 Ohms. The current finished board thickness is 0.093"
and consists of ten layers, 4 of which are controlled impedance
layers.
In discussion with a local fab shop I am finding that in order to
create 100 Ohm traces, the width of the dielectric (for FR-4) is
prohibitive.
The only alternatives are to cut back on the number of layers or
substantially increase the PWB thickness (which causes a large
headache in finding components with sufficient lead length).
I have two questions concerning this and I hope someone out there can
help:
a.) Are there any major drawbacks to producing a backplane with, say,
4 layers only? i.e. Is there a limitation on the minimum number of
layers for a backplane PWB that I don't know about?
b.) How are standard 0.093" OTS VME backplanes produced? They seem to
me to have a fair number of layers without resorting to thick PWBs or
superfine traces.
I hope that someone out there has had experience with this kind of PWB
and can help me.
Thanks in advance,
--
Max.P.Harris
Hardware Design Engineer
Lockheed Martin Canada, Inc.
'Nil illegitime carborundum'
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|