Hi
Lately we have some conductivity problems with the edge connectors.
It can be seen that after few hours at the open air the brightness of
the gold changed.There were few times that we got PC's from the
'field' with problems and after cleaning the edge connectors with an
eraser the problem was gone. First I want to know if any one deal
with the same problem and if anyone can tell me if there is any
differences between the definitions of the gold/nickel thickness of
the IPC600 & IPC610 standards.
Thanks
Tamir
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************