TECHNET Archives

April 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wHvjK-000BilC; Thu, 17 Apr 97 13:16 CDT
Old-Return-Path:
<[log in to unmask]>
Date:
Thu, 17 Apr 97 11:21:08 PST
Precedence:
list
From [log in to unmask] Thu Apr 17 14:
28:18 1997
Resent-Sender:
TechNet-request [log in to unmask]
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/12081
TO:
[log in to unmask]
Return-Path:
<TechNet-request>
Resent-Message-ID:
<"ng3ng2.0.G_8.rZcLp"@ipc>
Subject:
Rework
From:
[log in to unmask]
Resent-From:
[log in to unmask]
X-Loop:
[log in to unmask]
Message-Id:
<[log in to unmask]>
Parts/Attachments:
text/plain (24 lines) 
          Hello,
          
          Does anyone have any experience with removing a high-density 
          (>100-pins) PTH connector that is both press-fit and soldered (not my 
          design)? So far, I came up with preheat/prebake @ 250 F for 1-4 hrs 
          and use a solder pot (i.e., Air-Vac), but I'm worried that I will 
          damage the through holes. 
          
          Regards,
          
          [log in to unmask]

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2