TECHNET Archives

April 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wEwTI-000BilC; Wed, 9 Apr 97 07:27 CDT
Old-Return-Path:
<[log in to unmask]>
From [log in to unmask] Thu Apr 10 18:
18:50 1997
Precedence:
list
Resent-From:
[log in to unmask]
Resent-Sender:
TechNet-request [log in to unmask]
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/11798
TO:
"INTERNET:[log in to unmask]" <[log in to unmask]>
Return-Path:
<TechNet-request>
Resent-Message-ID:
<"mTn-i3.0.JLE.liuIp"@ipc>
Subject:
Re: SMD remelt
From:
"P. ROY" <[log in to unmask]>
Message-ID:
<[log in to unmask]>
X-Loop:
[log in to unmask]
Date:
09 Apr 97 08:19:16 EDT
Parts/Attachments:
text/plain (19 lines) 
could you apply latex solder mask on the solder side of the baord under the smt
components to act as a thermal insulator ie less heat transfer through the board
where the smt parts are.

Peter Roy 
Toronto

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2