Subject: | |
From: | |
Date: | Wed, 5 Mar 1997 16:25:56 +0300 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
What kind of flux are you using ? Boards may be oxidized. Try a more
aggressive flux.
Brs, Johannes
I have a serious problem on some of the board that stucked in the store.
All of them is at least 2 years.
When I wave-soldered the bare board, it has a lot of blow-holes, solder
balls, pin-holes.
Anyway, I try to purge all of them, but there are 6000 pieces in the Store.
I try to bake at at 100 deg. C for 4 hours. Too bad, it doesn't work.
I try to bake for any 4 hours just before wave-soldering. The result is
terrible. Not even a slight Help !!!
Can anybody give me some advises what should I do ???
Thanks in Advance
Poh ..
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|