Sid: Contact Fluke Corp. 1-800-44 FLUKE. They have an 80i series of 
amp clamps; the 410 and the 1010 will measure up 400 and 1000 amps 
respectively for either AC or DC current. These are designed to be used in 
conjunction with a variety of Fluke DMM's. The model 867 DMM will do 
everything your after plus a whole lot more.				
	We use the 80i-1010 with a lower cost 20 series DMM which doesn't 
have the monitor/record/down load functions but works fine as a process check 
and trouble shooting tool.This allows us to check not only electoplate rack 
connections but also rectifier output at the source and tank,up to 1000 amps.	
 Bye the way this is not an advertisement we don't get ours for free we have 
to buy them.								
					Regards				
						Michael Barmuta		
						Staff Engineer               
                                                Fluke Corp.		
						Everett Wa.
                                                (206)356-6076

On Fri, 21 Mar 1997 10:09:47 -0800 Sid Tryzbiak wrote:

> From: Sid Tryzbiak <[log in to unmask]>
> Date: Fri, 21 Mar 1997 10:09:47 -0800
> Subject: Unidentified subject!
> To: [log in to unmask]
> 
> I am looking for an amp probe to measure DC current up to 200 amps.  This
> will be used to verify that the copper plating racks are making good
> connections.  This amp probe needs capability to hold many readings in
> memory and be able to download the data to a PC for later analysis.  
> 
> Does anyone know where I can get an amp probe with memory and an RS-232
> port?
> 
> 
> 
> Thanks,
> 
> 
> Sid Tryzbiak
> VP Engineering
> Continental Circuits, Inc.
> 407-699-5000
> 
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
> * with <subject: subscribe/unsubscribe> and no text in the body.          *
> ***************************************************************************
> * If you are having a problem with the IPC TechNet forum please contact   *
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
> ***************************************************************************
> 



***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************