At 08:48 AM 3/11/97 EST, Gary S Thomas wrote:
>Does anyone know of any shareware that will convert Gerber to DXF????
>
>thanks in advance
>
>gary ...
Just tried CAM350 from Advanced CAM Technologies ( http://www.ecam.com/ )
with pretty good luck!
Their current version (v4.10) has a 7 day timed access period where you can
try all(?) the features. I'm guessing that after the 7 days it reverts to a
crippled version until you have either a dongle (hardware key) or other
access code which you purchase depending upon which level of feature you need.
+ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
| Jeff Foster [log in to unmask] |
| Engineering Assistant |
| Broadcast Electronics, Inc. http://www.bdcast.com |
+ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************