Mr.Prasad:
We are doing volume assembly of electronics on flexible circuits using 
two conventional SMT methods: 
(1)apply double side adhesive to the back of flex PWB,then put on rigid 
carrier board according to tooling holes easily for sceening paste,reflowing 
and assembly by use of SMT machine.
(2)put the flex PWB into two rigid thin stainless steel sheets according to 
tooling holes,just like sandwich. Open the windows in the steel sheets so as 
to expose the SMT area of flex PWB for assembly. So it is easy to SMT 
assembly.
As a matter of experience,(1) method is better than (2). For only several
SMT components on flex PWB,more cheape methods is manual operating,no need
use Auto SMT machines,especially in Asian.
Our company is the manufacturer of flex PWB,rigid PWB and assembly.

Contact:
AKM Electronics Industrial LTD.
YiLi Industrial Building,HuangGe,PanYu city,
GuangDong Province,PR China 511455
Tel:(86)84972446  Fax:(86)84972445
[log in to unmask]
Please note: it is 1 (one),not L in "PUBLIC1"
Regards                                    -
Chai Zhiqiang


***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************