TECHNET Archives

March 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Charles Elliott" <[log in to unmask]>
Date:
10 Mar 1997 09:36:59 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (36 lines)
Subject: ASSY: Bake for component removal                 3/10/97   9:32 AM

Hello,

I am interested in getting your input about the bake out parameters that 
are used upon component removal from a PCB.

In the case where component failure analysis is required, bake of the
board is required to ensure that "popcorn" does not take place upon
component removal (for moisture sensitive devices).

1) What temperature do you use for bake ?
2) What time do you use for bake ?
3) Are there any concerns with using 125'C for 24 hours ? (close to board
   Tg) This is what one of our component suppliers recommends.

Thanks in advance for your input.

Charles Elliott
Process Engineer
Newbridge Networks



***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************



ATOM RSS1 RSS2