Subject: | |
From: | |
Date: | Wed, 12 Mar 1997 22:16:14 -0500 (EST) |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
In a message dated 97-03-12 03:36:08 EST, you write:
>We started to work with our new line of electroless Ni-Au finishing. We have
>some problems , that seems to be similar to those , that were discussed 3
>weeks ago in the net . We observed several phenomenas, that are confusing us
>:
>1 ) Usually , we are adding to working basket brushed , double sided pannels
>just to have enough surface , as reguested by loading factor . I happend ,
>that one of those pieces got Nickel on one side , while the the second side
>was vitrually not plated . Production boars were plated correctly .
>2 ) We observed , that some pads on MLB are not plated .We found out , that
>they are electrically connected .
>3 ) As far as we know , double sided boards are not affected by " selective
>non-plating "
>
>We have a filling , that this problem is somehow connected with the network
>on the board . We don`t know , how to define the reasons and how to overcome
>the problems .
>
Sounds like some/much of this could be developing/cleaning issues, at least
if you are using a photoimageable soldermask. Why not give us a hint as to
what you are using for a soldermask, and what you do to the boards after
applying soldermask, whatever type you are using.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|