TECHNET Archives

March 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Mime-Version:
1.0
Content-Type:
text/plain; charset="us-ascii"
Old-Return-Path:
Date:
Wed, 5 Mar 1997 06:21:32 -0800
Precedence:
list
Resent-From:
Resent-Sender:
TechNet-request [log in to unmask]
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/10858
X-Sender:
TO:
Return-Path:
<TechNet-request>
X-Loop:
Resent-Message-ID:
<"thHvK3.0._NF.jyN7p"@ipc>
Subject:
From:
"LANmark Circuits,Inc." <[log in to unmask]>
Received:
by ipc.org (Smail3.1.28.1 #2) id m0w2HQE-0007zZC; Wed, 5 Mar 97 08:11 CST
From [log in to unmask] Wed Mar 5 15:
25:11 1997
X-Mailer:
Windows Eudora Pro Version 2.1.2
Message-Id:
Parts/Attachments:
text/plain (57 lines)
At 07:31 PM 3/5/97 +0800, you wrote:
Poh,
Baking should have at least helped the problem.  You might try baking
at a higher temp. (150 deg. C or 300 F)

You should also ask your board vendor what method of hole sensitization 
they're useing. (Electroless copper, Carbon, Graphite?)

Good Luck.....John

>I have a serious problem on some of the board that stucked in the store.
>All of them is at least 2 years.
>When I  wave-soldered the bare board, it has a lot of blow-holes, solder
>balls, pin-holes.
>
>Anyway, I try to purge all of them, but there are 6000 pieces in the Store.
>
>I try to bake at at 100 deg. C for 4 hours. Too bad, it doesn't work.
>
>I try to bake for any 4 hours just before wave-soldering. The result is
>terrible. Not even a slight Help !!!
>
>Can anybody give me some advises what should I do ???
>
>Thanks in Advance
>
>Poh ..
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
>* with <subject: subscribe/unsubscribe> and no text in the body.          *
>***************************************************************************
>* If you are having a problem with the IPC TechNet forum please contact   *
>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
>***************************************************************************
>
>
LANmark Circuits,Inc.		
400 Crown Point Circle
Grass Valley,Ca. 95945
(916)272-7280(voice)
(916)272-7017(fax)

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************



ATOM RSS1 RSS2