Have any of the PWB vendors out there ever fabricated PCB with brass or
copper inserts pressed though FR4 material
What I need to do is have 2 or 3  0.280 x 0.400 x 0.062 metal inserts
pressed into a fabricated PCB. the material would need to be flush with
both surfaces
of the 0.062 FR4. There would be pads of traces with in 0.040 of the
insert.



***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************