TECHNET Archives

February 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Date:
Mon, 3 Feb 1997 09:59:21 -0500 (EST)
Content-Type:
text/plain
Parts/Attachments:
text/plain (32 lines)
Luis, 

Maybe I'm just jumping on the bandwagon, but the others that have said the
vertical Vs. horizontal debate is a matter of data are right.  I've bought a
lot of equipment and have found that things like tech service, spare
parts(and cost), and standardization are gong to have a greater affect over
time.  Very fine lines (sub 2 mil) are manufactured every day vertically,
horizontally, and just to make things really controversial w/ and w/o
oscillation.

Depending on your future volume, keep in mind that your going to have many
horizontal processes in your plant and your going to want to connect those
lines as you become more automated, so having a mix will be self limiting.  

My personal experience has been that I've never seen a shop do anything
special with a vertical machine, but I have seen plenty of jammed sheets from
broken strings.  Additionally, conveying 2-core innerlayers could be hairy.

Scott

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************



ATOM RSS1 RSS2