Subject: | |
From: | |
Date: | Thu, 27 Feb 1997 20:33:02 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
1) Let it through etcher four times as you do for 1 oz copper and if the finish width is absolute importnat to you, you may compensate a trace/space, while you do image .
2) You need a lot , a lot resin to fill up the space
----------
From: sam mccorkel[SMTP:[log in to unmask]]
Sent: Thursday, February 27, 1997 11:42 AM
To: [log in to unmask]
Subject: FAB: 3 layer board with 4 oz copper
I have 2 issues that I'd like to get some advise on.
1) Does anybody have advise on etching 4 oz copper? The traces are .024" and
we etch with ammoniacal etchant.
2) Is there any advise on laminating a 3 layer board with 4 oz base copper
on all layers? .062" finish thickness and the layup is at our discretion.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|