Frederick A Martin wrote:
> Technet,

> I am not a Designer so excuse me if there is a simple 
> answer to this.
> 2 Tracks - side by side on a PCB - FR4 epoxy material
> 8KV running through 1 track
> How far does the 2nd track have to be to have less than 
> 300mA induced current ?

Unless you've already gotten an one, I don't think this 
is an easy question to answer. But, I'll try. 

First some questions...

How is track #2 terminated - high resistance or low resistance?

What's the current through track #1? 

I'm assuming the tracks are on the outside of the top or 
bottom layer of the pcb - they are not buried? 

************************************************************
------------------------------------------------------------
   The comments and opinions stated herein are mine alone,
   and do not reflect those of my employer.
------------------------------------------------------------
************************************************************

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************