TECHNET Archives

February 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Date:
Tue, 18 Feb 97 17:19:37 PST
Content-Type:
text/plain
Parts/Attachments:
text/plain (45 lines)
     The stress relief for terminal is at 3.2.8.1 of IPC-A-610B for axial 
     leaded parts. At 3.5.1.4 review figure 3-65 and the note below 
     refering to a part in this case a calibration part with leads in the 
     hollow terminal. The stress relief for the axial part is the same as 
     required for a plated through hole installation reference at 3.2.8 
     Stress Relief.  
     I hope this helps.
     Brian W
     


______________________________ Reply Separator _________________________________
Subject: Biferuated terminals
Author:  [log in to unmask] at uucpmail
Date:    2/15/97 03:56


I have tried to located a spec. for stress on parts i.e. res, placed in 
the turret of the terminal and cannot come up with one.  The only 
reference is 3.8.2.1 and they are all side views of terminals.  Is there 
a spec. for stress relief on this application?
     
*************************************************************************** 
* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
*************************************************************************** 
* To unsubscribe from this list at any time, send a message to:           * 
* [log in to unmask] with <subject: unsubscribe> and no text.        * 
*************************************************************************** 
* If you are having a problem with the IPC TechNet forum please contact   * 
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      * 
***************************************************************************
     

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************



ATOM RSS1 RSS2