int [log in to unmask]
To: INTERNET--MSBG

FROM: "Ravishankar VR"<W0292%YMS@msbg>

Hello everybody:
Here is some more info   ..

With Regards,
RAVISHANKAR VR  --- Senior Development Engineer,   GPDC,
Wipro GE Medical Systems Ltd, Bangalore, INDIA - 560 067
TEL:+91-80-845 2923/25 FAX:+91-80-845 2924 DIALCOM:7401-280 (GE only)
*** Forwarding note from W0444   --YMS      02/11/97 00:01 ***
To: W0292   --YMS

*** Reply to note of 02/08/97 22:41
From: Sripathy
To pass on the info to TECnet. Horse hair and camel hair brushes do the
needful as suggested. While using airjet it is suggested U make a Cubicle
of enough room (Let's say 2ftwide* 1ft ht with a slant top) made of glass or
perspex (glass prefered wih wodden linings) and have a hand entry from the
sides and the use the airjet inside the cubicle for jetting if the leads
The operator is safe and UR job is done. In fact the same cubicle is used
while trimming the leads with the nipper for safety !
Sripathy


***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************