TECHNET Archives

February 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Plating Particulates
From:
[log in to unmask]
Date:
Sat, 8 Feb 1997 17:37:22 -0500 (EST)
Content-Type:
text/plain
Parts/Attachments:
text/plain (20 lines) 
Particles of this sort can possibly cause rough plating in the form of
nodules at any part of the plated board. I would certainly want to get them
out of my system. As they are organic in nature they may also be attacked by
the high acid levels in the bath and cause organic contamination. Simple
filtration should remove them but make sure your filters are of a micron size
small enough to capture them. Change your filters often and by all means make
sure you eliminate the source of contamination.

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2