Subject: | |
From: | |
Date: | Mon, 03 Feb 97 09:32:47 cst |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Victor -
The use of a low temperature solder alloy will depend on what use
environment you are putting your product into. An example - there is a
bunch of data that shows that Sn/Pb/Bi alloys that are used above 100C
are not reliable because of a eutectic melting point that Sn/Pb/Bi
forms at 98C. Many people use low temp alloys very successfully.
Contact your solder suppliers for information on their low temp alloys
and possible applications.
Dave Hillman
Rockwell Collins
[log in to unmask]
______________________________ Reply Separator _________________________________
Subject: Low temperature solder
Author: [log in to unmask] at ccmgw1
Date: 2/2/97 9:15 PM
Hi,
I am looking for info. or prices of the low temperature solder
pastes?
Are these solder pastes used in shop floor at all? What is your opinion
in using this ?
Thank you very much.
Best regards,
Victor
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|