Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset="iso-8859-1" |
From [log in to unmask] Wed Feb 26 08: |
42:42 1997 |
Date: |
Tue, 25 Feb 1997 17:04:52 -0800 (PST) |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
Content-Transfer-Encoding: |
quoted-printable |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
X-Loop: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vzXhQ-0007zVC; Tue, 25 Feb 97 18:58 CST |
Resent-Message-ID: |
<"T8Z683.0.iV9.lgu4p"@ipc> |
Subject: |
|
From: |
|
Old-Return-Path: |
|
In-Reply-To: |
|
Cc: |
|
Message-Id: |
<v03007801af38cbe335f2@[128.102.146.157]> |
Parts/Attachments: |
|
|
Although I am not from a captive assembly house, I would be glad to work
with you off-line to develop a more effective screening process. The
process that you are using now does not seem to provide much thermal
stress, and is probably not very effective in weeding out problems.
>Our company is currently evaluating the use of Burn-In or Environmental
>Stress Screening our assemblies. We are a captive house providing board
>assemblies for the process control industry.
>
>Our current ESS cycle is as follows:
>
> Assemblies are elevated to 70°C in 5°C increments per minute.
>
> Then they are dropped to 0°C
>
> The cycle is repeated 12 times.
>
> Power is applied to the assemblies in 5 minute increments, 5 min.
>on
> then 5 min. off.
>
>My questions are:
>
> Do other capitive assembly houses use a similisr test ?
>
> Do contract assembly houses use a similiar test ?
>
> If so, What resuts are expected and obtained ?
>
> Are the tests performed based on some internal or external
>
> requirements ?
>
> Are the results utilized for further actions ?
>
> If so, What actions ?
>
>Your help and feed back is greatly appreciated.
>
>Rich Ackerson
>Sr. Ind. Eng.
>Elsag Bailey Electronics
>[log in to unmask]
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
>* with <subject: subscribe/unsubscribe> and no text in the body. *
>***************************************************************************
>* If you are having a problem with the IPC TechNet forum please contact *
>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
>***************************************************************************
Bill Marsh
Phone: 415-604-6979
e-mail: [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|