Mike, I'm not sure why I was on SST's web page, and I can't answer your 
question, maybe someone on [log in to unmask] will be able to provide 
information.

Regards
Dave Bergman, IPC


On Tue, 28 Jan 1997 [log in to unmask] wrote:

> Dear David
> 
> I noticed your company`s name listed under conferences on Solid State 
> Technology`s web page http:/www.solid-state.com with your name mentioned as 
> contact person for the conference which was held between 19 and 24 December 
> last year.
> 
> Not having had much success here in South Africa with my enquiry, it would be 
> appreciated if you could possibly assist with the following:
> 
> "What are the dimensions of the smallest aluminium metallized contact pad to 
> which conductive epoxies can be successfully applied on a high speed IC 
> assembly line, and what epoxies would you recommend?".
> 
> I would be most grateful for any assistance you could offer in this regard.
> 
> Yours sincerely
> 
> Mike
> 
> ----
> 
>  Mike Crooke, P O Box 2531, Durbanville 7551, 
>  South Africa. Tel: (+27) (021) 975-4545.
>  E-mail: <[log in to unmask]>
> 
> 
> 

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************