At 09:23 23/01/97 PST, you wrote:
>The following is an attached Text item from cc:Mail.  It contains
>information that had to be encoded to ensure successful transmission
>through various mail systems.  To decode the file use the UUDECODE
>program.
>--------------------------------- Cut Here ---------------------------------
>
>Attachment Converted: c:\eudorapro\attach\TextItem
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To unsubscribe from this list at any time, send a message to:           *
>* [log in to unmask] with <subject: unsubscribe> and no text.        *
>***************************************************************************
>* If you are having a problem with the IPC TechNet forum please contact   *
>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
>***************************************************************************
>
Kyle,

Contact Polar Instruments, Inc. at the following address and ask for their
free 16 page booklet "An Introduction to the Manufacture of Controlled
Impedance PCB's".  They also have a free Windows controlled impedance
calculator disk.

Polar Instruments, Inc.
5373 Guide Meridian, Bldg D
Bellingham, WA 98226
                                Contact: Robert P. Bosley
Ph/Fax:   (360) 398-1946
Customer: (800) 328-0817
Email: <[log in to unmask]>

I hope this helps.  If you have any specific questions please feel free to
contact me off-line.

Best regards

Andy Burkhardt <[log in to unmask]>
Tel: + 44 1481 53081
Fax: + 44 1481 52476
http://www.polar.co.uk
----------------------------------------------------------------------
World leaders in PCB faultfinding and controlled impedance measurement
----------------------------------------------------------------------

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************